REFILL

All ball point pen models (except for metal pens from page 77, model Shine, Top Spin Frozen, Playa and Trick) are equipped with special high quality refills with T.C. ball and a nickel plated brass tip (ULTRA refill with nickel silver tip). Standard refill for each model is shown on according page. Standard for all models is blue ink. Black ink is also available (except for metal pens from page 77 and models Shine and Playa) - without extra charge.
  COLOURS
Each model can be ordered in individual colour combination according to colour details mentioned on each page. At the end of this catalogue you find a folded printed colour card. Slight variations compared to original plastic parts are possible. Special colours can be produced according to your Pantone or HKS requirement on demand.
  SCREEN-PRINT
Beispiel Siebdruck
The film must be coated right reading, for multicolour prints with register crosses. Colours will be printed according to your colour specifications (Pantone, HKS, RAL). Please consider following for halftone prints: Screen is halftone 40 (40 lines per centimeter), Halftone is between 20 and 80 %.

Imprints on metal pens are only partly scratch resistant, despite of optimal matching of all imprint
components.
» Further printed samples
  PAD-PRINT
Beispiel Tampondruck

The film must be side inverted. Colour specifications (Pantone, HKS, RAL) are required. Please consider following for halftone prints: Screen is halftone 48, (48 lines per centimeter), Halftone is between 20 and 80 %.

Minimum line thickness for films positive 0,15 mm and negative 0,3 mm.

For screen- and pad-prints according to Pantone, HKS or RAL on coloured barrels please consider that it might be necessary to print white under (i.e. one printing colour additionally).

Imprints on metal pens are only partly scratch resistant, despite of optimal matching of all imprint components.

» Further printed samples
  ETCHING


The film must be coated right reading. The etching on the surface will be darkgrey, depending on the underground. Please consider that for each 2.000 pcs. etchings we need one film (e.g. for 10.000 pcs. etchings we need 5 films).

Attention: Maximum line thickness of texts and logos 1,2 mm.
 
  LASER ENGRAVING

For laser engraving we need high resoluted files (look at „FILES“)
  Digitalfolie

Hier wird ein Motiv mittels Digitaldruck auf eine Trägerfolie aufgedruckt. Diese Folie wir dann anschließend im Heißpräverfahren auf den Schaft des Kugelschreibers aufgebracht. Die Daten für die Erstellung der Folienbilder sollten hochauflösend und in CMYK angelegt sein. Sonderfarben können nicht gedruckt werden.
FILES

Please provide:

- Vectorfiles: Illustrator, FreeHand, Corel Draw, QuarkXPress (Font style has to be enclosed)
- Pixelfiles: Photoshop (600 dpi min.). The logo size must be 1:1 or bigger.